How to pick the right TV

New to television

While LCD TVs are relatively new, the technology has been around for a while in the computer world as monitors. LCD displays share many of the attributes of plasma TVs: they’re thin, they hang on a wall and they have only recently become available in the home television market. However, that’s where the similarities end. LCD TVs are available in a wider variety of sizes starting as small as seven inches and ranging up to 57 inches. Also, because most LCD TVs don’t use glass on the face plate, they are less susceptible to glare and can be used in rooms with more light.

LCD (liquid crystal display) panels work through the use of polarizing crystals. These crystals are placed in front of a constant light source, usually a florescent bulb. When electricity is passed through the crystals, they block a certain amount of light from the bulb; more electricity makes the crystals block more light. By grouping sets of crystals in threes (one red, one green, one blue) a pixel is made and colors can be formed.

Bright and efficient

Because they use florescent bulbs, LCD TVs can produce a bright image. It also means that they are energy efficient. However, because the bulb is always on, they often struggle with the dark areas of a picture. Also, many LCD sets do not respond quickly to fast motion resulting in motion blur on the trailing edges of fast moving objects.

Here are some questions to ask when shopping for LCD TVs:

• What is the set’s “response time”? This is an indication of how well the panel will respond to motion. The smaller the number, the better.

• What is the contrast ratio? A higher number means that the set will do a better job showing detail in dark areas of the screen.

• What is the “native” resolution of the set and how does it deal with other resolutions? These are fixed pixel sets, so they must convert all other non-native resolutions to that one. How well is each able to do it?

• What is included with the set? Most will come with a table stand and a few with the wall bracket as well.

• Is the HD TV tuner built in? Because LCD panels are thin, they often do not have space for this tuner and, even if they do, they often are not CableCARD™ ready.

• How far “off-axis” can I view the set? Some LCD sets will change color or dim as you move off to the side.

These are the large boxes that used to be the only choice for a home theater-sized screen. Today, these sets have been eclipsed in popularity by many of the new displays, but can still represent a good value… if you have the space.

The power of three

Rear Projection TVs use three CRTs, the “tube” in tube TVs, that each project one of the primary colors through lenses, off of a mirror and on to the back of a screen, much like Micro-display sets. However, because they basically use three small tube televisions to create the image, it is difficult to build them into small cases.

Keep them in line

RPTVs share many of the same benefits as tube TVs: they are bright, have accurate color and can produce a nice, deep black. However, the three tubes can drift out of alignment creating colored edges. This can be fixed with by “converging” the set periodically. Also, they will dim as you move off of the centerline of the set, both vertically and horizontally.

Here are some questions to ask when shopping for a Rear Projection TV:

• How much space does it need? These are floor-standing sets in big cabinets. Make sure there is room for them.

• How many people will be watching this? The manufacturers of these sets spend a lot of time focusing the light from the three CRTs out the center of the screen. As a result, someone sitting directly in front of this type of display is treated to one of the most natural pictures available.

However, people sitting to the sides or below the center may not see as bright an image.

How easy is it to “converge” the set? The three tubes will get out of alignment. What menu options can correct this problem?

A movie theater in your home

Front Projection systems are the ultimate in home theater because they fit the room very much like a film projector: shining light across the room onto a screen. As a result, the screen size can be adjusted to fit a room or wall exactly. In fact, for the biggest possible image, front projectors are it: some of them are capable of creating a 300 inch image!

Different flavors

These systems use all of the same technologies as micro-display TVs as well as three-CRT systems similar to those found in RPTVs. All of the same benefits of each of those technologies also apply here. However, unlike all of those technologies, you now have to choose a screen as well. Because they come in a variety of sizes, mounting options and reflectivity characteristics, they can affect the viewing experience almost as much as the projector itself. The screen’s importance is why these are often called “two-piece” projectors.

Keep them in the dark

There are a few other things to be aware of in these systems. To get an accurate picture, the room should be dark; these systems can only produce a black that is as dark as the room. Also, the larger the screen, the dimmer the picture will be. A projector only has so much light to spread across the screen so the bigger the screen, the thinner that light is spread.

Here are some questions to ask when shopping for a front projection system:

• What size screen will I get if the projector is so far back? Most front projectors publish “throw distance” tables that determine how big an image any one projector can produce given a particular distance from the screen.

• What display technology does the projector use? This will allow you to apply all of the information and questions from the previous section.

• What is the “native” resolution of the set and how does it deal with other resolutions? Most of these are fixed pixel sets, so they must convert all other non-native resolutions to that one. How well is each able to do it? Is it even HD?

• Does it have a tuner? Most front projection systems do not include any tuner, digital or analog. For watching TV, these need a tuner box or VCR to get the signal.

• What mounting options are available for both the projector and the screen? Most projectors can be mounted on the ceiling or placed on a table. Screens can be frame mounted, rolled-up or even stand mounted.

Now that you know about DTV and the different choices there are to display it, it’s time to determine which is right for your needs. The first question to answer is budget: how much do you want to spend on the set?

While some of the newer display technologies offer incredible performance and new ways of fitting a television into a home, they also tend to cost more. Tube TVs are still the leader here being the least expensive way to get a DTV display. However, if you look at then from a price-per-inch perspective, then RPTV and Micro-display become very attractive.

Don’t answer yet…

Before you decide on a number and start shopping, there are some other things you might consider:

How often is your current television on in the house? Most Americans have their set on for more than eight hours a day, every day of the year. It is the primary source of entertainment in our homes; you will use this more often and with greater enjoyment than almost any other product you own with the exception of your bed. Make sure that you budget enough to do this right.

Is this replacing your main TV or is it a secondary set? If this is the one that is used most often, then it’s worth spending a bit more on it. If it is a secondary set, say for the bedroom or kitchen, while you may not need to spring for a larger picture, you might want to invest in different design and mounting options.

Something for every budget

Keep in mind, even if you are on a tight budget, there is a DTV that will fit. Sure, the world’s largest plasma set might be beyond your reach, but owning it would mean clearing off your entire wall anyway.

If you answer this size question next, then many of the remaining issues involved in deciding on a new TV are also answered. For instance, most of the different display technologies are only available in certain sizes. So, if you know that the best size is between 55 and 60 inches, then you also know that LCD and Tube TVs are not going to work.

How much space do you have?

Start by determining where in the room the set will go. Is the space constrained by the size of the wall or does it need to fit in or on a particular piece of furniture? If this is the case, get the measurements before going any farther.

One fifth the distance

If you aren’t constrained by the room, then the rule most experts use is to divide your distance from the front of the set by five. This will give you the screen height. In other words, if you sit ten feet from the front of where the screen will go, a TV that is two feet (24 inches) high is recommended. This size is roughly what a movie screen would look like when seen from two thirds of the way back; what is considered the “sweet spot” of a movie theater. Keep in mind that this number is only a recommendation, feel free to adjust it to taste; lots of people enjoy sitting in the front row.

Now that you know the size, your choices of display type should already be down to two or three instead of all six. To narrow it down farther, consider how it will fit in the room. For instance, if you plan on mounting it to the wall, then LCD or Plasma are your only two choices.

Bright rooms

If you still have a couple of choices, then think about how much light is in the room and how it will affect the picture. If it is bright, then you want a set that is also bright so that it can overcome all the light. Keep in mind that a bright room also means a high chance of glare. Therefore, a TV with a front surface made of glass may not be the best choice. This situation is perfect for LCD or micro-display, as long as the micro-display doesn’t have a glare-inducing plastic shield on the front.

Dark rooms

Conversely, if the room is darker or doesn’t get much glare, then something that can give you great detail in the dark areas will probably be better. Plasma, tube TV or RPTV will work well in these situations.

See it for yourself

No matter what set you think is right, it is critical that go look at the set before purchasing. Reviews and other people’s opinions are fine, but you are the one who has to live with the TV. Make sure that it is up to your standards. However, when you do go look at televisions, there are some things you can do in order to make sure that you’ll be happy with the set when you get it home.

How does it look turned off?

Cast an eye on the cosmetics as well. Brochures and online pictures rarely show the real look and quality of the construction. You have to live with the set in your room, even when it is off; make sure that it will fit the look of your home.

Give it some space

When you do look at the picture, don’t stand too close. No matter how good a TV is, if you stand three inches from the screen you will see flaws. Instead, stand as close as the closest seat will be to the set in your home. If it looks good there, then you’ll be happy with it at home.

Adjust the set

Next, if you are comparing two sets, make sure that they show the same signal and have similar color, contrast and brightness settings. Otherwise, how will you know that one really has a better image than another? Take the time to adjust these settings yourself. Also, keep in mind that the picture will look different when you get it home. It won’t be under florescent lights with a TV signal that is split to hundreds of set. But if one looks better than others in the store, it will probably look better than those others in your home as well.

Don’t count connections

Instead count your sources. You will need one connection for every component that you plan on connecting and at least one more for future growth. Also, look for connectors that prepare you for the future, particularly HDMI. We’ll discuss those in the next section.

What you choose to feed a television is as much a part of its performance as a person’s diet. No matter how good the display is and how well it processes images, if it is receiving a weak or noisy signal, the resulting picture will not be the best the set can produce.

What’s your favorite channel?

Decide what to watch first. Do you need Classic Football or hourly news? If you do, then you’re probably getting cable or satellite. Ask them if they have a trial period so that you can preview the image before you are charged.

Cable

Roughly 70% of American households are connected to a cable system. While they require monthly fees and installation, cable companies offers hundreds of stations, many of them in high definition. Most cable providers do require a set-top box. This means you’ll need to find room for one more component; something that’s especially tricky if you plan on hanging the set on the wall: sets that are Digital CableCARD™ Ready can help here. Picture quality does vary from provider to provider as they try to fit more channels down their transmission lines or through their satellites. Also, with cable, which set-top box is provided can also affect the signal quality.

Satellite

Satellite systems also offer hundreds of channels and high definition options and are connected in roughly 20% of households. While satellite does offer most of your local channels, they often won’t transmit local access channels that offer high school sports or other neighborhood programming. On the other hand, satellite is available everywhere in the lower 48 states, not just metro areas.

Antennas

Often the easiest way to get a digital TV signal is through an old fashioned antenna. They are relatively inexpensive and don’t require any monthly fees. The downside is choice: most areas only have a few stations broadcasting and not all of them are digital yet. However, all of them need to be broadcasting in DTV by January 1, 2007 and the older analog signal will be shut off no later than December 31, 2009.

A few simple rules

You've finally selected a TV. It's been delivered and cable or satellite service has been turned on. Now come the most daunting part: dealing with all of those wires. But really, it's not that bad. With a few simple rules you can be up and running in no time.

First, TV manufacturers don't know what you plan on connecting, so they put in more connections and more varieties than you will need.

The connectors on the back of a TV are inputs: they need to be connected to things that send, or output, a signal.

Most connections require at least three wires: one for the video signal and two for the audio signal (left and right). All three of these wires need to be connected to the same input number for the set to work correctly.

They're all color coded; match up the colors on the same input and you're good to go.

Plasma TV Manufacturers

Plasma TV Manufacturer's

Who really makes your Plasma HDTV?

Very few Plasma TV manufacturers actually make their own plasma TV. Most use a system called rebadging. Basically they buy from a Original Equipment Manufacturer (OEM), claim to have a secret extra special feature then stick a new sticker on it and bill you thousands extra for the sticker. If you really want to pay thousands for a sticker please call our sales dept and we will sell you a sticker with our website logo for much less then the couple thousand you will pay Fujitsu or Runco

THE MAJOR PLASMA TELEVISION MANUFACTURERS

NEC - Nec is a OEM manufacturer and is now owned by Pioneer. Although owned by Pioneer they still operate under a separate label. NEC has commercial units and home units. They also supply screens to Marantz Runco and several other companies. NEC sold their plasma factory to Pioneer and now buys their panels from Pioneer and installs their own electronics.

Panasonic - Makes the complete units, Supplies Toshiba, JVC, Fujitsu and more

Pioneer Plasma - Pioneer owns NEC and has switched production to the NEC lines. The new 50 inch and the 42 inch units are all NEC glass. To tell if a 50 inch is Pioneer or NEC, check the resolution, If 1280 it is Pioneer , If 1365 it is NEC . 42 inch Pioneer Plasma TV is NEC . 43 inch Plasma TV is Pioneer Glass

Fujitsu Plasma - Only makes their own 42 inch in partnership with Hitachi . 50 and 61 inch Fujitsu Plasmas are Panasonic and NEC but the 42 inch are their own. Note Hitachi plasma screens are identical to Fujitsu and cost thousands less, 55 Inch Fujitsu is same as Hitachi,

Sony Plasma TV - Makes their own boards and chips but uses Fujitsu/ Hitachi plasma screen glass for 42 inch, 50 inch is NEC, 42inch EDTV is NEC

Hitachi - Owns 50% of plasma screen factory with Fujitsu. Makes own internal components. 42 Alis screens are Hitachi as is the New 55, 50 inch are Pioneer and 42 EDTV is a NEC screen

Philips - Uses Fujitsu/ Hitachi glass screen and most internal components as well. However, Philips makes its own bezel with built in speakers.

LG / Zenith - Make their own glass in Korea

Samsung - Makes its own components in Korea

THE SECONDARY MANUFACTURERS

RCA/ Thompson - Partners with NEC to OEM its product. Just a NEC with a new bezel.

JVC - 50 inch is Panasonic, 42 is NEC

Toshiba - OEM from Panasonic.

Sharp - OEM product through Pioneer for 50" and 42 though they may make some internal component changes.

Runco - OEM 50" from Pioneer and 42" from NEC,

Marantz - OEM plasma monitor from NEC. It is our understanding its just a sticker job

Studio Experience use a Samsung panel but custom electronics

Viewsonic - OEM 50" plasma screen from Pioneer ( old 502 ).

Sampo - 42v3 is old Fujitsu, 42v6 is Samsung Plasma,

Gateway: Units are rebranded Sampo

Norcent Units may be rebranded Sampo

Maxent is Sampo, There seems to be a rumor spreading around that maxents are actually Panasonic panels. These seems extremely unlikely as Panasonic cannot keep up with there own requirement. We suspect that maxents are actually LG glass with their own electronics.

Advantages of LCD Displays

What are the advantages of LCD Displays??

Besides looking cool and futuristic in your living room, what are the advantages of owning an LCD TV or monitor?

It's easier to watch. Flat panel TV displays like LCDs and Plasmas are significantly brighter and feature higher contrasts than traditional CRT sets. Which means that an LCD TV will perform exceedingly well under most ambient light conditions. A brightly lit room won't wash out its picture, nor will lamplight cause a glare on your television screen. The beauty of these flat screens is that you don't have to turn out the lights to see the image clearly and easily. Nor do you have to worry about eyestrain, since neither LCDs nor Plasmas flicker the way old-fashioned TVs do.

And, you can watch TV from almost anywhere in a room since flat-screen LCD television displays can have up to a 160° viewing angle, which means your TV will look good when viewed from any point 80° in either direction from the center of the display.

One issue affecting the overall quality of the picture reproduced on LCDs has to do with dot pitch. This term refers to the distance between subpixels of the same color in adjoining pixel triads. The closer these "dots" are to one another, the sharper the resolution will be. This is especially true when displaying computer signal images and graphs. And the picture in front of you will be more realistic and detailed. Higher dot pitches also increase the viewing angles of LCD panels. Since dot pitch is measure in millimeters (mm), a good rule of thumb is this: Smaller dot pitches make for sharper images. You generally want a dot pitch of .28mm [" 10,000 pixels/in2 of your display] or finer.

Note: Plasma TV displays have long been touted as having wider viewing angles than comparably sized LCD monitors. But recent improvements in quality have made LCD televisions and monitors comparable to Plasma TVs with respect to their viewing angles. According to Sharp, a leading manufacturer of LCDs, the newest generation of LCD displays have just as good viewing angles as plasma sets, but this is only true of the better brands. In any event, even the best LCD monitors have yet to achieve the breadth of viewing angles found on typical Plasma monitors.

You can watch your new television right out of the box because the tuner is included. LCD TVs generally come with tuners and speakers already built in, so they're more or less plug-and-play devices. Since most LCD TVs don't require external tuning devices, they are ideal for smaller applications, where space is at a premium (like bedrooms and small living rooms) or where clutter is inconvenient (like crowed kitchen countertops).

Note: Some LCD televisions have outboard media receivers, though many-like Toshibas-don't. Always inquire about extra hardware before you buy: You won't always see your LCD monitor pictured with an external receiver (even if it has one), so it's up to you to find out whether there is any "extra" hardware you need to know about.

The picture is smooth, colorful, and (best of all) wide. LCDs have none of those annoying scan lines that conventional sets do. This owes to the fact that each subpixel has its own transistor electrode, which creates smooth, evenly lit images across the entire surface of the display. It also enables these displays to reproduce images that are saturated with color. [256 shades of red x 256 shades of green x 256 shades of blue " 16.8 million different colors!]

Note: All this requires an enormous number of transistors-upwards of 2.4 million for displays supporting a typical resolution of, say, 1024x768. This means that, if there is a problem with any one of these transistors, a subpixel will be affected, which causes the pixel associated with it to fail. Dead pixels will emerge over time and with use. In general, though, the number of dead pixels affecting a given display will be few enough so as to go virtually unnoticed by the average viewer.

Recent advances in LCD technology have markedly increased the response time of these displays, resulting in even smoother on-screen presentations. One way to think about response time is in terms of the amount of time it takes a pixel to "refresh" itself-i.e., to go from being active to being inactive, which is to say, ready to be re-activated). Response time is measured in milliseconds (ms), with the best LCD monitors now clocking in with response times under 20ms. Slower response times (>20ms) can cause the image on the panel to lag and appear jerky, an effect known as "streaking" or "trailing." Another phenomenon associated with slower response times is "ghosting." This occurs when the display is made to switch quickly from light to dark states (or vice-versa). In these instances, on-screen images may appear to stay on the screen belatedly.

LCD displays come either with a 16:9 aspect ratio (i.e., 16 units wide to 9 units high), the proper one for viewing HDTV and for watching DVDs, or with a 4:3 aspect ratio, the norm for most broadcast television shows. If you opt to go with a widescreen (16:9) display, does this mean that you'll have to watch some shows where the image is distorted or stretched unnaturally? No. When displaying a "normal" or 4:3 picture image from satellite, VCR, or cable TV, the image can be viewed in a number of ways-in its original format (with black or gray bars on the sides of the screen), or in "full" mode (where the image is converted or "stretched" using specially designed algorithms to reduce the visible stretch marks as much as possible). Again, the quality of the picture produced under such circumstances depends largely on the quality of the television with which you scale-up 4:3 pictures or scale-down 16:9 ones. Nevertheless, this is only a temporary dilemma: Since HDTV is shown in widescreen, this is the format of the future for much of broadcast television.

The display is multi-functional and long-lived. An LCD is a television monitor, capable of displaying HDTV, regular TV, and home video. It's also a computer monitor. In fact, it can accept any video format. LCD displays typically include inputs for (a) composite video, (b) S-video and component video, and (c) one or more RGB inputs from a computer. Because of the high resolution of LCDs, text and graphics look especially sharp when viewed on them, which makes them the best solution for displaying data and web-based content.

Note: Some LCDs (including many by Sharp) do not come with RGB inputs. If you plan to utilize your LCD display as a computer monitor, be sure to check out the specs of the unit you're thinking of purchasing.

You can expect to use your LCD monitor in many capacities for many years: The average lifespan of one of these displays is 60,000 hours. If watching TV was your full-time job, and you did it 24 hours a day, it would take you almost 7 years to wear out your LCD display. With more normal viewing habits of, say, 8 hours per day, you can extend the lifespan of your TV by a decade or more (to about 20 years)!

Note: The lifespan of an LCD display is generally longer than that of similar-sized plasma displays. Some manufacturers claim that their LCDs can last upwards of 80,000 hours when used continuously under controlled conditions (e.g., in a room with "standard" lighting conditions and 77° temperatures throughout). Just how realistic such claims are is debatable. After all, whose living room has no windows and remains at a perfectly comfortable 77 degrees year-round?

A more immediate concern is the actual lifespan of the light source in your LCD. This is perhaps THE critical component of your display unit. It is particularly important for maintaining a proper white balance on your TV. As these florescent bulbs age, colors can become unbalanced, which could result in too much red, for example, in your picture. So, it pays to buy name-brand displays. You will definitely pay more for better LCD display brands like Sharp, Toshiba, JVC, or Sony than you will for cheap Chinese or Korean variety knock-offs, but you'll get a backlighting bulb of higher quality and, in the end, a TV whose colors will stay truer longer.

In some cases, the warranty for this particular feature can be shorter than for the display as a whole. This means you might have to buy a whole new LCD monitor because the coverage on its backlight has expired. Moreover, some bulbs can be replaced, while others are built in to the unit itself. You should definitely do some research on the backlighting system, how it's configured, and how it's warranted.

Avoid being a casualty of the Blu-Ray vs. HD DVD

With the advent of a new generation of high density discs to replace DVDs, it is easy for consumers to be confused about which format to upgrade to. The two competing formats, Blu-Ray and HD DVD, both offer a significant upgrade in video and audio quality; but as standalone players for both formats can retail for several hundreds of pounds, it is understandable that consumers do not want to end up buying the new Betamax.

In terms of technical performance both formats are similar, and show little discernible difference to the average consumer. A dual-layer Blu-Ray disc offers 50GB of storage space, compared to 30GB on a dual-layer HD DVD disc, but as of yet, only 40% of Blu-Ray releases are dual-layer, with the remaining 60% being single-layer discs utilising 25GB of storage space. Still, even when comparing a 50GB Blu-Ray disc with a 30GB HD DVD, the difference to consumers will be minimal. Both formats support the MPEG-2, VC-1, and H.264 formats for video compression, and Dolby Digital, PCM, and DTS for audio compression. As a result, this battle of formats is going to be waged mainly via the titles available and the price and quality of players.

Initially, both formats were supported by all of the major studios, but as different studios have different stakes in the two formats, major studios started to drop formats. For example, Sony, owner of Columbia and TriStar Pictures, is one of the major developers of the Blu-Ray format, and has decided to drop HD DVD for its releases. Thus, Spiderman 3 is only available for Blu-Ray, something which will surely irk Spidey-loving HD DVD adopters. Releases on both formats tend to be priced similarly, a little mor
e than their standard DVD counterparts.

When it comes to the players, a lot has happened, even in the past year. The first generation of standalone players for the two formats, released last year by Toshiba, Samsung and Panasonic, were seen as pricey and more aimed at early adopters than the general public, and have already been discontinued.

The latest generation of players have generally been seen as more value for money, but the smart money says to look elsewhere for now. Sony decided to include Blu-Ray playing capability for the Playstation 3 Console, which was undoubtedly a wise business move. It means the 5 million current PS3 owners already have a Blu-Ray player and gives those unsure which format to switch to an incentive to buy a PS3 as a low-risk option – even if Blu-Ray does go the way of the Betamax, they still have a state-of-the-art gaming console. In a similar tactic, consumers can now buy an HD DVD drive for the Xbox 360, which can also connect to a high-end PC via a USB connection.

As for now, Blu-Ray has the edge in the format war. Figures by Nielsen VideoScan, Gfk and the Nikkei, show that Blu-Ray is outselling HD DVDs at a ratio of 2 to 1 in the US and Europe and a ratio of 9 to 1 in Japan. This does not mean the battle is over just yet – a lot can still happen, particularly if Nintendo should decide to throw their hat in the ring by announcing an external player for either format for the Wii (a drive for normal DVDs will be released next year).

Hopefully at the end of the format war, the ultimate benefactor will be customers and not the corporations, but until then alternatives to standalone players can provide an affordable way to enjoy the best video and audio quality available for home viewing.

What is a GPS navigation system & why would I buy it?

What is a GPS navigation system & why would I buy it?

Vehicle/car navigation is an inexpensive upgrade to any vehicle. Aftermarket navigation units use the newest technology and mapping software to get you from point “A” to point “B” without error. Also, with today’s technology, you can get this upgrade for far less expensive than the steep price tag that dealerships charge when including factory navigation.

Most aftermarket units can be used for much more than just getting directions. Expandability features allow for numerous upgrades, including: DVD, Mp3, I-pod integration, and Bluetooth, the aftermarket units are well worth the investment.

Navigation Systems Types:

Portable GPS units are just one type of Navigation available. These types of GPS units are mainly made to be suctioned to your windshield and powered from your vehicle’s DC outlet. The best feature of these would be the versatility. You can easily unplug the unit and move from vehicle to vehicle. Some even have built-in batteries to provide you with navigation even without an external power source. A couple sacrifices of portable Navigation include screen size and expandability. Most portable units only have a screen size of around 4 inches and can only be used for navigation.

Another type of navigation system would be the in-dash. In-Dash Navigation units usually include a To
uch-Screen Monitor, which puts entering destination addresses at your finger-tip. These systems replace your factory radio, and provide control over your entire audio system. With systems designed to fit both Standard and Oversized Radios it’s possible to find a system for any vehicle. Options such as Bluetooth, IPod Integration, Satellite Radio and TV tuners allow you to outfit your vehicle with all the options at a fraction of the cost that your Dealership would charge.

Some Things to Look For in any Navigation system:

-Points-of-Interests (POI) – The more points of interest loaded into the unit the better the chances of you finding a destination with minimal information. -Hard-Drive- Maps are pre-loaded onto your unit, updates are as easy as downloading new maps from your PC and loading them onto your NAV Hard Drive via SD Card or DVD. Most Hard-drive NAVs will allow you to Update your POI for your area. -DVD-ROM - Maps are loaded onto a DVD which must be inserted into the System in order to you’re the Navigation Feature. New updated DVDs must be purchased as years go on in order to stay current with the growth of your area.

Now Navigation system is affordable no matter what your budget. It’s a small price to pay for all the comforts of a Luxury Vehicle and the Satisfaction of knowing you will never again have to pull over and ask for directions.